Remote Power Control Switch

SwitcheOn utilizes the Telus, Rogers and Bell networks in Canada but you do not need an account with them and any smart phone can control SwitcheOn with the Android or iPhone app.

NOTE SwitcheOn products will not operate in the province of Saskatchewan.

SwitcheOn uses LTE-M and NB-IoT bands deployed as part of 5G rollouts, which operates much further from cellular towers than normal 3G or 4G

Learn about Rogers Network Coverage Areas: https://www.rogers.com/mobility/network-coverage-map

Learn about Bell Netwok Coverage Areas: https://www.bell.ca/Mobility/Our_network_coverage

Learn about Telus Netwok Coverage Areas: https://www.telus.com/en/mobility/network/coverage-map

• As many as you want
• New users can scan the device directly, or the code from another user
• Share access with as many users as you like!

Most likely, yes. The vast majority of SwitcheOns are installed in metal
buildings and work perfectly right out of the box. About 2% of users
require larger antennas. If you have signal issues, contact us and we’ll
help you chose a correct antenna.

SwitcheOn uses LTE-M, which was created as part of the recent 5G allocation.

It is expected to be in operation for at least another decade.

Yes! SwitcheOn uses the Verizon network in the USA. You can buy now, directly from Switcheon.com, the US site. https://switcheon.com/product/switcheon_remote_power_switch/

• Download the mobile app from the Apple App Store, or Google Play Store
• Plug in your Power Switch
• Scan the QR code displayed on the unit

• Open the SwitcheOn Power Control mobile app
• Toggle the switch

• SwitcheOn’s included year of service begins the first time the
  device is scanned. On first scan, we activate the built-in SIM and
  provision the service.
• This usually happens in seconds, but can occasionally take up to 15 minutes.
• If after waiting 15 minutes, the device has not provisioned, please
  un-plug and re-plug the box. This will force it to immediately try
  connecting again.
• After the initial activation, SwitcheOn should connect within 1 minute after being powered up.

• SwitcheOn depends upon your local Telus, Bell and Rodgers cellular networks.
• Cellular signals travel differently at night and in different temperatures and humidity levels.
• If your box operates correctly during the day and not at night, a larger antenna might be necessary.
• Contact us for advice on choosing a proper antenna. There are plenty of inexpensive options available and we’re here to help.

• To avoid damage, do not exceed the maximum load (15A). If this value
  is exceeded, the SwitcheOn will be damaged and no longer function.
• Before using the SwitcheOn with multiple devices, ensure that the
  electrical circuit into which the unit is plugged has sufficient
  capacity to handle the electric circuit load of the multiple devices.

• SwitcheOn is not intended to be permanently wired to any electrical system.
• Unplug the unit for any servicing required. You run the risk of electric shock if you do not do so.
• Misuse of this device can cause fire, personal injury, property damage or death.
• Read the Warnings and Instructions provided with this product before use.
• SwitcheOn must be installed and or used in accordance with appropriate electrical codes and regulations.
• To avoid damage, do not exceed the maximum load (15A). If this value
  is exceeded, the SwitcheOn will be damaged and no longer function.
• Before using the SwitcheOn with multiple devices, ensure that the
  electrical circuit into which the unit is plugged has sufficient
  capacity to handle the electric circuit load of the multiple devices.
• If you are unsure about any part of these instructions, consult an electrician.